Atmel AT45DB011D-S(256 byte page) SOIC(8) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FASMR08SHL, FASM08SHL, FASMR08SHA (obs.), FASM08SHA (obs.), FASM08SHB (obs.), FASM08SG (obs.), WASM08SHA (obs.) (repl.) | FX4ASMR08SHL, FX4ASM08SHL, FASMR08SHL, FASM08SHL, FX4ASM08SHB (obs.), FASMR08SHA (obs.), FASM08SHA (obs.), FASM08SHB (obs.), FASM08SG (obs.), LX4ASM08SHL (repl.), WX4ASM08SHB (obs.) (repl.), WASM08SHA (obs.) (repl.) | WX4ASMR08SHA (obs.), LX4ASM08SHL, WX4ASM08SHB (obs.), WASM08SHA (obs.) |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSMR08SHL, FSM08SHL, FASMR08SHL, FASM08SHL, FSMR08SHA (obs.), FSM08SHA (obs.), FSM08SHB (obs.), FSM08SG (obs.), FASMR08SHA (obs.), FASM08SHA (obs.), FASM08SHB (obs.), FASM08SG (obs.), WASM08SHA (obs.) (repl.) | FX4SMR08SHL, FX4SM08SHL, FSMR08SHL, FSM08SHL, FX4ASMR08SHL, FX4ASM08SHL, FASMR08SHL, FASM08SHL, FX4SM08SHB (obs.), FSMR08SHA (obs.), FSM08SHA (obs.), FSM08SHB (obs.), FSM08SG (obs.), FX4ASM08SHB (obs.), FASMR08SHA (obs.), FASM08SHA (obs.), FASM08SHB (obs.), FASM08SG (obs.), LX4ASM08SHL (repl.), WX4ASM08SHB (obs.) (repl.), WASM08SHA (obs.) (repl.) | WX4ASMR08SHA (obs.), LX4ASM08SHL, WX4ASM08SHB (obs.), WASM08SHA (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSMR08SHL, FSM08SHL, FASMR08SHL, FASM08SHL, FSMR08SHA (obs.), FSM08SHA (obs.), FSM08SHB (obs.), FSM08SG (obs.), FASMR08SHA (obs.), FASM08SHA (obs.), FASM08SHB (obs.), FASM08SG (obs.), WASM08SHA (obs.) (repl.) | FX4SMR08SHL, FX4SM08SHL, FSMR08SHL, FSM08SHL, FX4ASMR08SHL, FX4ASM08SHL, FASMR08SHL, FASM08SHL, FX4SM08SHB (obs.), FSMR08SHA (obs.), FSM08SHA (obs.), FSM08SHB (obs.), FSM08SG (obs.), FX4ASM08SHB (obs.), FASMR08SHA (obs.), FASM08SHA (obs.), FASM08SHB (obs.), FASM08SG (obs.), LX4ASM08SHL (repl.), WX4ASM08SHB (obs.) (repl.), WASM08SHA (obs.) (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: 1-megabit DataFlash. This algorithm supports 256 bytes per Page. Please make sure the data file is in 256 bytes per Page format. This device is set to 264 bytes per Page by default at the factory. A confirmation dialog will be displayed if 264 bytes per Page device is detected. If accepted the configuration register of the device will be programmed to 256 byes per Page permanently. Otherwise the executed operation will be aborted. A seperate 264 byte page device selection is available for the 264 bytes per Page device with 264 bytes per Page format data file. ***256 and 264 devices should not be mixed when running a job in Concurrent mode.*** Erase before programming must be enabled if the state of the device is uncertain. The device has a 128-byte Security Register. The first 64 bytes are the one-time user programmable space and the remaining 64 bytes are factory programmed by Atmel and will contain a unique number for each device. The factory programmed data is fixed and cannot be changed. The User Programmable Space is located in Data Pattern addresses [20000h-2003Fh]. If the User Programmable Space is not blank Erase will fail on this area. The Sector Protection Register can be set under Device > Configure. The default Device Range is set to [00000h-1FFFFh]. Please select Entire File’ under Device > Range if the User Programmable Space needs to be included. Sector LockDown can be set under Device > Configure. Once a sector is locked down Erase and Program will fail. The sector then cannot be unlocked. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Atmel |
|---|---|
| Packages | SOIC(8) |
| Part Number | AT45DB011D-S |
| Set programming | Yes |
| Vcc(program) | 3 |
| Package | |
| 8-bit Bytes |