Atmel ATSAM3S2BA-MU LAP(65) Device

Adapters for Automated Programmers

8th Gen	9th Gen
FVE4ASMR64QFNX, FVE4ASMR64QFNX	FVE4ASMR64QFNX

Adapters for Manual Programmers

8th Gen	9th Gen
FVE4ASMR64QFNX, FVE4ASMR64QFNX	FVE4ASMR64QFNX

Adapters for Engineering Programmers

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT:

Device Type:	SAM4S Series Flash Microcontroller
Device Size:	128 KByte
Algorithm Programming Method:	Fast Flash Programming Interface (FFPI)

Memory Organization:

*Memory Type*	**Attributes^()***	*Included in default Range (Y/N)*	*DUT Physical Word Address(hex)(if this area is selected/Activated)*	*BPWin Buffer Word Address(hex)*
Main Flash Area	R/W/E	Yes	0000_0000h – 0000_FFFFh	0000_0000h – 0000_FFFFh

Default Algorithm Range	—	—	0000_0000h – 0000_FFFFh	0000_0000h – 0000_FFFFh

* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. 1. GP NVM Bit 0 and the SSE secure command can be programmed by enabling ‘Secure(SSE Command) operation’. Once Secured only an erase operation can unsecure the part. 2. GP NVM Bit 1 and flash lock bits can be set in Device > Configure. Please refer to the datasheet for more detail.

‘



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

Manufacturer	Atmel
Packages	LAP(65)
Part Number	ATSAM3S2BA-MU
Set programming	Yes
Vcc(program)	2.1
Package