Atmel ATSAMC21J17A-MNT QFN(64) Device
Adapters for Automated Programmers
| 9th Gen |
| FVE4ASMR64QFNTA |
Adapters for Manual Programmers
| 9th Gen |
| FVE4ASMR64QFNTA |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | ARM-based 32-bit MCU with Flash. |
| Device Size: | 128K-Byte Flash |
| Algorithm Programming Method: | SWD protocol. |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Embedded Flash Memory | R/W/E | Yes | 0000_0000 – 0001_FFFF | 0000_0000 – 0001_FFFF |
| Default Algorithm Range | R/W/E | Yes | 0000_0000 – 0001_FFFF | 0000_0000 – 0001_FFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection.
Special Device Considerations: The Erase operation performs a Chip Erase which will erase the entire flash contents. Lock Bits & Secure Bit (SSB) are supported in this algorithm. Setting a lock bit to 0 will prevent any programming to the corresponding region without first erasing the device. Enable Secure to set the security bit but ID must be disabled afterwards to execute Erase operation. User Signature Area & NVMCTRL Register are not supported in this algorithm. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Atmel |
|---|---|
| Packages | QFN(64) |
| Part Number | ATSAMC21J17A-MNT |
| Set programming | Yes |
| Vcc(program) | 3.3 |
| 8-bit Bytes | |
| Package |