+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page

Atmel ATtiny1617-MNR QFN(24) Device

Adapters for Automated Programmers

8th Gen 9th Gen
FVE4ASMR24QFNZT, FVE4ASMR24QFNZT FVE4ASMR24QFNZT

Adapters for Manual Programmers

8th Gen 9th Gen
FVE4ASMR24QFNZT, FVE4ASMR24QFNZT FVE4ASMR24QFNZT

Adapters for Engineering Programmers


Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Note


IMPORTANT:

Device Type: tinyAVR Microcontroller
Device Size: 16 KByte Flash with 256 Byte EEPROM
Algorithm Programming method: UPDI


Memory Organization:

Memory Type

Attributes(*)

Included in default Range (Y/N) DUT Physical Byte Address(hex)(if this area is selected/Activated) BPWin Buffer Byte Address(hex)
EEPROM Memory R/W/E Yes 0000_1400 – 0000_14FF 0000_1400 – 0000_14FF
Flash Memory R/W/E Yes 0000_8000 – 0000_BFFF 0000_8000 – 0000_BFFF
Default Algorithm Range 0000_1400 – 0000_BFFF 0000_1400 – 0000_BFFF

* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection.Special Device Considerations:The Fusebytes and Lockbits Registers are set under Device > Configure.

Option Description
WDTCFG Watchdog Configuration. The Watchdog Timer (WDT) is a system function for monitoring correct program operation.
BODCFG BOD Configuration. The Brownout Detector (BOD) monitors the power supply and compares the voltages.
OSCCFG Oscillator Configuration. The actual frequency of the OSC20M is determined by the Frequency Select bits.
TCD0CFG Timer Counter Type D Configuration.
SYSCFG0 System Configuration 0. Modifying SYSCFG0[3:2] bits from default will prevent further access with this algorithm.Programmed in SECURE.
SYSCFG1 System Configuration 1.
APPEND Application Code End. These bits set the end of the application code section in blocks of 256 bytes.
BOOTEND Boot End. These bits set the end of the boot section in blocks of 256 bytes.
LOCKBIT Lock Bits. When the part is locked UPDI cannot access the system bus so it cannot read out anything but CSspace.Programmed in SECURE.

The content of the Signature Row fuses (SIGROW) is pre-programmed and cannot be altered. ‘

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

Manufacturer

Atmel

Packages

QFN(24)

Part Number

ATtiny1617-MNR

Set programming

Yes

Vcc(program)

3.3

8-bit Bytes
Package