Atmel ATtiny5-TS8R SOT23(6) Device

Adapters for Automated Programmers

6th Gen	7th Gen	8th Gen	9th Gen
FASML06SOTAC, FASML06S (obs.), FASML06SOTAB (obs.), FASML06SOTA (obs.)	FX4ASML06SOTAC, FASML06SOTAC, FX4ASML06S (obs.), FX4ASML06SOTAB (obs.), FX4ASML06SOTA (obs.), FASML06S (obs.), FASML06SOTAB (obs.), FASML06SOTA (obs.), WX4ASML06S (obs.) (repl.), LX4ASML06SOTAB (obs.) (repl.), LX4ASML06SOTAC (repl.), LASML06SOTA (obs.) (repl.)	FVE4ASML06SOTA (obs.), FVE4ASML06SOTAB (obs.), FVE4ASML06SOTAB (obs.), FVE4ASML06SOTA (obs.)	FVE4ASML06SOTAB (obs.), FVE4ASML06SOTA (obs.)

Adapters for Manual Programmers

6th Gen	7th Gen	8th Gen	9th Gen
FASML06SOTAC, FASML06S (obs.), FASML06SOTAB (obs.), FASML06SOTA (obs.)	FX4ASML06SOTAC, FASML06SOTAC, FX4ASML06S (obs.), FX4ASML06SOTAB (obs.), FX4ASML06SOTA (obs.), FASML06S (obs.), FASML06SOTAB (obs.), FASML06SOTA (obs.), WX4ASML06S (obs.) (repl.), LX4ASML06SOTAB (obs.) (repl.), LX4ASML06SOTAC (repl.), LASML06SOTA (obs.) (repl.)	FVE4ASML06SOTA (obs.), FVE4ASML06SOTAB (obs.), FVE4ASML06SOTAB (obs.), FVE4ASML06SOTA (obs.)	FVE4ASML06SOTAB (obs.), FVE4ASML06SOTA (obs.)

Adapters for Engineering Programmers

6th Gen	7th Gen
FASML06SOTAC, FASML06S (obs.), FASML06SOTAB (obs.), FASML06SOTA (obs.)	FX4ASML06SOTAC, FASML06SOTAC, FX4ASML06S (obs.), FX4ASML06SOTAB (obs.), FX4ASML06SOTA (obs.), FASML06S (obs.), FASML06SOTAB (obs.), FASML06SOTA (obs.), WX4ASML06S (obs.) (repl.), LX4ASML06SOTAB (obs.) (repl.), LX4ASML06SOTAC (repl.), LASML06SOTA (obs.) (repl.)

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT: 512 Bytes of Flash memory. The Buffer is mapped to the Data Memory Map below. An attempt to program any data space other than the Configuration Lock and Flash Program Memory sections will be ignored.

Device Address	Memory Section
0000h-003Fh	IO SPACE
0040h-005Fh	SRAM DATA MEMORY
0060h-3EFFh	RESERVED
3F00h-3F01h	NVM LOCK BITS
3F02h-3F3Fh	RESERVED
3F40h-3F41h	CONFIGURATION BITS
3F42h-3F7Fh	RESERVED
3F80h-3F81h	CALIBRATION BITS
3F82h-3FBFh	RESERVED
3FC0h-3FC3h	DEVICE ID BITS
3FC4h-3FFFh	RESERVED
4000h-41FFh	FLASH PROGRAM MEMORY
4200h-FFFFh	RESERVED

In Device Configure the Configuration and Lock bits should be set to the desired value prior to programming. The Configuration Byte and the Lock Byte may be viewed from the Buffer in addition to Device Configure. The Calibration and Device ID bits are read only. These bits are factory programmed and cannot be altered. ‘



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

Manufacturer	Atmel
Packages	SOT23(6)
Part Number	ATtiny5-TS8R
Set programming	Yes
Vcc(program)	5
8-bit Bytes
Package