+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page

Cypress CY7C65211-24LTXI LAP(24) Device

Adapters for Automated Programmers

8th Gen 9th Gen
FVE4ASMR24QNG, FVE4ASMR24QNG FVE4ASMR24QNG

Adapters for Manual Programmers

8th Gen 9th Gen
FVE4ASMR24QNG, FVE4ASMR24QNG FVE4ASMR24QNG

Adapters for Engineering Programmers


Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Note


IMPORTANT:

Device Type: Microcontroller
Device Size: 32 Kbyte
Algorithm Programming Method: SWD

Memory Organization:

Memory Type

Attributes(*)

Included in default Range (Y/N) DUT Physical Byte Address(hex)(if this area is selected/Activated) BPWin Buffer Byte Address(hex)
[User Flash] [R/W/E] [Yes] [0x0000-0x7FFF] [0x0000-0x7FFF]
[User Checksum] [R/W/E] [Yes] [0x90300000-0x90300001] [0x90300000-0x90300001]
[Flash protection] [R/W/E] [Yes] [0x90400000-0x9040001F] [0x90400000-0x9040001F]
[Device Silicon ID] [R/W] [Yes] [0x90500000-0x9050000B] [0x90500000-0x9050000B]
[Chip Level Protection] [R/W/E] [Yes] [0x90600000] [0x90600000]
Default Algorithm Range [0-0x90600001] [0-0x90600001]

* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection.

1. Serialization Supported: No
2. Device Silicon ID is for read only for the addresses [0x905000020x90500003 and 0x90500005]
3. The address [0x90600001] is ignored.
4. There are four states of Chip Level Protection into which the silicon can be moved:[ VIRGIN(0x00) OPEN(0x01) PROTECTED(0x02) KILL(0x04)].
– VIRGIN(0x00) – This mode is not for custom use. Can not program this value to device.
– OPEN(0x01) – In this mode can access all the needed resources including Erase program and verify flash.
– PROTECTED(0x02) – In this mode access to Flash is disabled. Still allow to Erase and reprogram flash.
– KILL(0x04) – The device can no longer be updated.

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

Manufacturer

Cypress

Packages

LAP(24)

Part Number

CY7C65211-24LTXI

Vcc(program)

3.6

8-bit Bytes
Package