Cypress CYSHM35925I-M068LTI LAP(68) Device
Adapters for Automated Programmers
| 8th Gen | 9th Gen |
| FVE4ASMR68QFNT, FVE4ASMR68QFNT | FVE4ASMR68QFNT |
Adapters for Manual Programmers
| 8th Gen | 9th Gen |
| FVE4ASMR68QFNT, FVE4ASMR68QFNT | FVE4ASMR68QFNT |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | ARM Cortex-M0. |
| Device Size: | 128-KByte Flash. |
| Algorithm Programming Method: | Serial wire debug(SWD). |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Main Flash Memory | R/W/E | Yes | 0000_0000 – 0001_FFFF | 0000_0000 – 0001_FFFF |
| Check sum bytes | R | Yes | 9030_0000 – 9030_0001 | 9030_0000 – 9030_0001 |
| flash protection | R/W/E | Yes | 9040_0000 – 9040_007F | 9040_0000 – 9040_007F |
| Metadata-12bytes | R | Yes | 9050_0000 – 9050000B | 9050_0000 – 9050000B | Chip Level Protection | R/W/E | Yes | 9060_0000 – 9060_0000 | 9060_0000 – 9060_0000 |
| Default Algorithm Range | — | — | 0000_0000 – 9060_0001 | 0000_0000 – 9060_0001 |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection.
Special Device Considerations:
| 1. | Chip Level Protection 1 byte: [0x90600000]: There are four states of Chip Level Protection into which the silicon can be moved:[ VIRGIN(0x00) OPEN(0x01) PROTECTED(0x02) KILL(0x04)]. – VIRGIN(0x00) – This mode is not for customer use. Can not program this value to device. – OPEN(0x01) – In this mode access to all the needed resources is enabled including erase program and verify flash. – PROTECTED(0x02) – In this mode access to Flash is disabled. Still allow to erase and reprogram flash. – KILL(0x04) – The device can no longer be updated.
| 2. |
The address [0x90600001] is ignored. |
| ||
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Cypress |
|---|---|
| Packages | LAP(68) |
| Part Number | CYSHM35925I-M068LTI |
| Set programming | Yes |
| Vcc(program) | 3.3 |
| 8-bit Bytes | |
| Package |