Cypress S25FS064SAGMHI010(Custom) SOIC(8) Device
Adapters for Automated Programmers
| 8th Gen | 9th Gen | Flashstream |
| FVE4ASMH08SA, FVE4ASMR08SHLA, FVE4ASM08SHLA, FVE4ASMR08SHA (obs.), FVE4ASM08SHA (obs.), FVE4ASMH08SA, FVE4ASM08SHLA, FVE4ASMR08SHA (obs.), FVE4ASM08SHA (obs.), FVE4ASMR08SHLA | FVE4ASMH08SA, FVE4ASM08SHLA, FVE4ASMR08SHA (obs.), FVE4ASM08SHA (obs.), FVE4ASMR08SHLA | FVE4ASMH08SA, FVE4ASMR08SHLA, FVE4ASM08SHLA, FVE4ASMR08SHA (obs.), FVE4ASM08SHA (obs.), FVE4ASMH08SA, FVE4ASM08SHLA, FVE4ASMR08SHA (obs.), FVE4ASM08SHA (obs.), FVE4ASMR08SHLA |
Adapters for Manual Programmers
| 8th Gen | 9th Gen | Flashstream |
| FVE4ASMH08SA, FVE4ASMR08SHLA, FVE4ASM08SHLA, FVE4ASMR08SHA (obs.), FVE4ASM08SHA (obs.), FVE4ASMH08SA, FVE4ASM08SHLA, FVE4ASMR08SHA (obs.), FVE4ASM08SHA (obs.), FVE4ASMR08SHLA | FVE4ASMH08SA, FVE4ASM08SHLA, FVE4ASMR08SHA (obs.), FVE4ASM08SHA (obs.), FVE4ASMR08SHLA | FVE4ASMH08SA, FVE4ASMR08SHLA, FVE4ASM08SHLA, FVE4ASMR08SHA (obs.), FVE4ASM08SHA (obs.), FVE4ASMH08SA, FVE4ASM08SHLA, FVE4ASMR08SHA (obs.), FVE4ASM08SHA (obs.), FVE4ASMR08SHLA |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: This is a Custom algorithm. 64M-bit Serial Flash. This algorithm uses Standard SPI mode to Program and Verify/Read the device. The status register bits can be set under Device Config > Configure . Erase must be selected if device to be programmed already has QE bit enabled. The TBPARM OTP bit will be programmed first. You may not mix a top boot device with a bottom boot device. The default Device Range is set to [000000h-7FFFFFh]. Please modify the range under Device Config > Range if any of the Security Registers need to be included. The correct password value located in the range [800400h-800407h] may be read only after it is programmed and before the Password Mode has been selected by programming the Password Protection Mode bit to 0 in the ASP Register (ASP[2]). The OTP region is located in the range [800000h-8003FFh]. The Factory Programmed 128-bit random number located at the beginning of the OTP region cannot be programmed and data in this region will not be shown in the Buffer Editor. OTP Lock bits are located in the Buffer location [800010h-800013h] and Reserved bits are located at [800014h-80001Fh]. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Cypress |
|---|---|
| Packages | SOIC(8) |
| Part Number | S25FS064SAGMHI010 |
| Set programming | Yes |
| Vcc(program) | 1.9 |
| 8-bit Bytes | |
| Package |