Freescale Semiconductor MC68HC11F1(W/Conf) PLCC(68) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM68PE, FASM68PC, FASM68P | FASM68PE, FASM68PC, FASM68P |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM68PB, FSM68PE, FSM68PC, FSM68P, FSM68PA, FSM84UP, FASM68PE, FASM68PC, FASM68P, FSM68PW (obs.), FSM68PM (obs.), FSM84AH (obs.), FSM84UPB (obs.) | FSM68PB, FSM68PE, FSM68PC, FSM68P, FSM68PA, FSM84UP, FASM68PE, FASM68PC, FASM68P, FSM68PW (obs.), FSM68PM (obs.), FSM84AH (obs.), FSM84UPB (obs.), FSM68PB, FSM68PE, FSM68PC, FSM68P, FSM68PA, FSM84UP, FASM68PE, FASM68P, FASM68PC, FSM68PW (obs.), FSM68PM (obs.), FSM84AH (obs.), FSM84UPB (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM68PB, FSM68PE, FSM68PC, FSM68P, FSM68PA, FSM84UP, FASM68PE, FASM68PC, FASM68P, FSM68PW (obs.), FSM68PM (obs.), FSM84AH (obs.), FSM84UPB (obs.) | FSM68PB, FSM68PE, FSM68PC, FSM68P, FSM68PA, FSM84UP, FASM68PE, FASM68PC, FASM68P, FSM68PW (obs.), FSM68PM (obs.), FSM84AH (obs.), FSM84UPB (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: The following describes the buffer setup:Address range FE00h – FFFFh is the EEPROM section.The data for the CONFIG Register should be at $103F. The Blank state of CONFIG Register is $FF. Only bit 2(NOCOP) in CONFIG Register is available for reading and verifying. The others bit alway read back 1′. Please refer to manufacturer user manual for details. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Freescale Semiconductor |
|---|---|
| Packages | PLCC(68) |
| Part Number | MC68HC11F1 |
| Vcc(program) | 5 |
| Package | |
| 8-bit Bytes |