Adapters for Automated Programmers
6th Gen | 7th Gen |
FASM68PE, FASM68PC, FASM68P, FASM68PM | FASM68PE, FASM68PC, FASM68P, FASM68PM |
Adapters for Manual Programmers
6th Gen | 7th Gen |
FSM68PB, FSM68PE, FSM68PC, FSM68PMA, FSM68P, FSM68PA, FSM84UP, FASM68PE, FASM68PC, FASM68P, FASM68PM, FSM68PW (obs.), FSM68PM (obs.), FSM84AH (obs.), FSM84UPB (obs.) | FSM68PB, FSM68PE, FSM68PC, FSM68PMA, FSM68P, FSM68PA, FSM84UP, FASM68PE, FASM68PC, FASM68P, FASM68PM, FSM68PW (obs.), FSM68PM (obs.), FSM84AH (obs.), FSM84UPB (obs.), FSM68PB, FSM68PE, FSM68PC, FSM68PMA, FSM68P, FSM68PA, FSM84UP, FASM68PE, FASM68P, FASM68PC, FASM68PM, FSM68PW (obs.), FSM68PM (obs.), FSM84AH (obs.), FSM84UPB (obs.) |
Adapters for Engineering Programmers
6th Gen | 7th Gen |
FSM68PB, FSM68PE, FSM68PC, FSM68PMA, FSM68P, FSM68PA, FSM84UP, FASM68PE, FASM68PC, FASM68P, FASM68PM, FSM68PW (obs.), FSM68PM (obs.), FSM84AH (obs.), FSM84UPB (obs.) | FSM68PB, FSM68PE, FSM68PC, FSM68PMA, FSM68P, FSM68PA, FSM84UP, FASM68PE, FASM68PC, FASM68P, FASM68PM, FSM68PW (obs.), FSM68PM (obs.), FSM84AH (obs.), FSM84UPB (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: The following describes the buffer setup:Address range 0h – 1FFh is the EEPROM section.The Blank state of CONFIG Register is $FF. The CONFIG Register can only be set under Device/Configure.The EEPROM access and [EE3-EE0] in CONFIG Register can not be read back.Only bit 2(NOCOP) in CONFIG Register is available for reading and verifying. Please setup Device/Configure before programming and refer to manufacturer user manual for details.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
Manufacturer | Freescale Semiconductor |
---|---|
Packages | PLCC(68) |
Part Number | MC68HC11F1MFN3 |
Vcc(program) | 5 |
8-bit Bytes | |
Package |