Freescale Semiconductor MC68HC705C8ACPB QFP(44) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM44PQB | FASM44PQB |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM44PQB, FASM44PQB | FSM44PQB, FASM44PQB |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM44PQB, FASM44PQB | FSM44PQB, FASM44PQB |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with EPROM. The window on the chip must be covered before performing any operation on the chip.The following describes the buffer setup:[$0020-$004F] USER PROM 48 BYTES;[$0100-$1EFF] USER PROM 7680 BYTES;[$1FDF] Option Register.[$1FF0-$1FFF] Mask Option Registers & User Vectors PROM.The Option Register (address $1FDF) will always read $02.Address $1FDF should be set to $02 to pass Compare operation.The Security Bit (Bit3 of Option Register) can be set using theDEVICE/SECURE command.The blank state of the EPROM is $00.Other address locations are ignored and should be set to $00.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Freescale Semiconductor |
|---|---|
| Packages | QFP(44) |
| Part Number | MC68HC705C8ACPB |
| Set programming | Yes |
| Vcc(program) | 5 |
| 8-bit Bytes | |
| Package |