Freescale Semiconductor MC68HC711EA9VFN2 PLCC(52) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM52PC, FASM52P, FASM52PI, FASM52PD | FASM52PC, FASM52P, FASM52PI, FASM52PD |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM52PC, FSM52PCA, FSM52P, FSM52PA, FSM52PH, FSM52PI, FSM52PD, FSM84UP, FASM52PC, FASM52P, FASM52PI, FASM52PD, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) | FSM52PC, FSM52PCA, FSM52P, FSM52PA, FSM52PH, FSM52PI, FSM52PD, FSM84UP, FASM52PC, FASM52P, FASM52PI, FASM52PD, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM52PC, FSM52PCA, FSM52P, FSM52PA, FSM52PH, FSM52PI, FSM52PD, FSM84UP, FASM52PC, FASM52P, FASM52PI, FASM52PD, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) | FSM52PC, FSM52PCA, FSM52P, FSM52PA, FSM52PH, FSM52PI, FSM52PD, FSM84UP, FASM52PC, FASM52P, FASM52PI, FASM52PD, FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: The data for the EPROM should be at $D000-$FFFF and the data forthe EEPROM should be at $B600-$B7FF in the buffer. The data for theCONFIG Register must be entered by using the Configure menu.The CONFIG Register must be programmed by Secure command.The DEVICE/Configure options should be set before run the DEVICE/SECURE command.The DEVICE/Configure options cannot be Verified.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Freescale Semiconductor |
|---|---|
| Packages | PLCC(52) |
| Part Number | MC68HC711EA9VFN2 |
| Vcc(program) | 5 |
| 8-bit Bytes | |
| Package |