Freescale Semiconductor MC68HC908JB16FA QFP(32) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM32TQG | FASM32TQG |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSM32TQG, FASM32TQG, WASM32TQG (repl.) | FSM32TQG, FASM32TQG, WASM32TQG (repl.) | WASM32TQG |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM32TQG, FASM32TQG, WASM32TQG (repl.) | FSM32TQG, FASM32TQG, WASM32TQG (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with FLASH.The following describes the buffer setup:The addresses $BA00 to $F9FF are FLASH.The addresses $FFD0 to $FFFF are user vectors.Please use Secure command to program the monitor mode security address $FFD1.The monitor commands can be disabled by writing $7B to the address $FFD1.After the monitor mode security is set read of FLASH is disabled. FLASH can only be mass erased.This device has an eight byte security feature from $FFF6 to $FFFD. To read or secure aprogrammed device with the security feature the buffer or Device/Configure mustbe filled with correct data from address $FFF6 to $FFFD. Incorrect data at theselocations will prevent access to the device.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Freescale Semiconductor |
|---|---|
| Packages | QFP(32) |
| Part Number | MC68HC908JB16FA |
| Set programming | Yes |
| Vcc(program) | 5 |
| 8-bit Bytes | |
| Package |