Freescale Semiconductor MC68HRC705JJ7CP DIP(20) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM48D300, FASM48D600 | FASM48D300, FASM48D600 |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.) | FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.), FSM48D, FSM48DH, FSM48DF, FSM48DC, FASM48D300, FASM48D600, FSM48DB (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.) | FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D300, FASM48D600, FSM48DB (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with EPROM. The window on the chip must be covered before performing any operation on the chip. The following describes the buffer setup: Addresses $0020 thru $0027 are PEPROM.Addresses $0700 to $1EFF are user EPROM.The Mask Option Registers(MOR) is located at $1FF0 and $1FF1.Bit 7 of the MOR at address $1FF0 contains the security bit.if this bit is set in the buffer device will be securedand will fail Verify after Program. Please refer to the user’s manual for information aboutthis option. Addresses $1FF2 to $1FFF are user vectors.Please set Default buffer value’ (under Buffer/Options) to 0before loading the Buffer. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Freescale Semiconductor |
|---|---|
| Packages | DIP(20) |
| Part Number | MC68HRC705JJ7CP |
| Vcc(program) | 5 |
| 8-bit Bytes | |
| Package |