Freescale Semiconductor MC908EY16MFAE(Osc Trim) QFP(32) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASMR32LQFB | FASMR32LQFB |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSMR32LQFB, FASMR32LQFB, WASMR32LQFB (repl.) | FSMR32LQFB, FASMR32LQFB, WASMR32LQFB (repl.) | WASMR32LQFB |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSMR32LQFB, FASMR32LQFB, WASMR32LQFB (repl.) | FSMR32LQFB, FASMR32LQFB, WASMR32LQFB (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with FLASH.The following describes the Buffer setup:The addresses $C000 to $FDFF are Flash.The addresses $FF7E is the FLASH Block Protection Register(FLBPR).The addresses $FF80 is the ICG Trim Value(ICGT).The addresses $FFDC to $FFFF are Flash and User Vectors.This device has an eight bytes security feature from $FFF6 to $FFFD. To read aprogrammed device with the security feature the Buffer or Device Configure mustbe filled with correct data from address $FFF6 to $FFFD. Incorrect data at theselocations will prevent access to the device.This algorithm treats the Trim location as normal erasable/programmable flash memory.This algorithm generates a trim value for the internal oscillator. The locationthis value is programmed to is specified in the Device Configure’ options.The Program command will erase the device calculate the trim value and thenprogram the data.Trim value generated by internal 4Mhz clock. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Freescale Semiconductor |
|---|---|
| Packages | QFP(32) |
| Part Number | MC908EY16MFAE |
| Vcc(program) | 5 |
| Package | |
| 8-bit Bytes |