+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page

Freescale Semiconductor MC9S08LL36CLH LQFP(64) Device

Adapters for Automated Programmers

6th Gen 7th Gen 9th Gen
FASMR64LQFZA FX4ASMR64LQFZA, FASMR64LQFZA, LX4ASMR64LQFZA (repl.) LX4ASMR64LQFZA

Adapters for Manual Programmers

6th Gen 7th Gen 9th Gen
FSMR64LQFZA, FASMR64LQFZA FX4SMR64LQFZA, FSMR64LQFZA, FX4ASMR64LQFZA, FASMR64LQFZA, LX4ASMR64LQFZA (repl.) LX4ASMR64LQFZA

Adapters for Engineering Programmers

6th Gen 7th Gen
FSMR64LQFZA, FASMR64LQFZA FX4SMR64LQFZA, FSMR64LQFZA, FX4ASMR64LQFZA, FASMR64LQFZA, LX4ASMR64LQFZA (repl.)

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Note


IMPORTANT:

Device Type: MCU
Device Size: 36KB Flash


Memory Organization:

Memory Type

Attributes(*)

Included in default Range (Y/N) DUT Physical Byte Address(hex)(if this area is selected/Activated) BPWin Buffer Byte Address(hex)
FLASH(PPAGE 1) R/W/E Yes 0000_5000 – 0000_7FFF 0000_5000 – 0000_7FFF
FLASH(PPAGE 3) R/W/E Yes 0000_C000 – 0000_FFFF 0000_C000 – 0000_FFFF
FLASH(PPAGE 2) R/W/E Yes 0002_A000 – 0002_BFFF 0002_A000 – 0002_BFFF
Default Algorithm Range 0000_5000 – 0002_BFFF 0000_5000 – 0002_BFFF

* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Special Device Considerations:

There are some locations reserved in the FLASH memory map. The following are reserved addresses: $FFB8-$FFBC and $FFBE. These locations will be ignored during Program Read and Verify.Erase command will erase entire FLASH memory map included reserved memory.*** During Erase factory programmed trim values from addresses [$FFAC – $FFAF] will be saved first and restored at the end. Erase will fail if the device is secured. If the device fails erase the Factory Trim value might be corrupted. The part cannot be used unless re-trimmed. The lower two bits (Bit1 and Bit0) at address $FFBF are security bits (SEC01:SEC00). They are ignored during Program and Verify and read 1:0 if unsecured during Read and Compare. To secure the device use SECURE command.

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

Manufacturer

Freescale Semiconductor

Packages

LQFP(64)

Part Number

MC9S08LL36CLH

Vcc(program)

3.3

8-bit Bytes
Package