Freescale Semiconductor MKW36A512VHT4 QFN(48) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASMC48QFNTZ, LX4ASMC48QFNTZ (repl.) | FASMC48QFNTZ, LX4ASMC48QFNTZ (repl.) |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FASMC48QFNTZ, LX4ASMC48QFNTZ (repl.) | FASMC48QFNTZ, LX4ASMC48QFNTZ (repl.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FASMC48QFNTZ, LX4ASMC48QFNTZ (repl.) | FASMC48QFNTZ, LX4ASMC48QFNTZ (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | Microcontroller ARM Cortex M0+. |
| Device Size: | 512KByte Flash Memory. |
| Algorithm Programming Method: | Serial wire debug interface(SWD) + Custom Boot loader. |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Program Flash Memory(Reset vectors) | R/W/E | Yes | 00000000 – 0003FFFF | 00000000 – 0003FFFF | Flash FlexNVM Memory | R/W/E | No | 10000000 – 1003FFFF | 10000000 – 1003FFFF |
| Default Algorithm Range | — | — | 0000000 – 0003FFFF | 0000000 – 0003FFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection.
Special Device Considerations:
| 1. | Address location [0x40C] corresponds to the Flash security byte(FSEC). There are two security bits (bit 0 and bit 1)in FSEC. Using a value of 1 for bit 0 is not supportable with this algorithm. If the datapattern has a value of 1 here it will be ignored during program.
| 2. |
The algorithm supports the 32-bit long word in Big-Endian byte order. Please make sure that the data file is also in such byte order. |
3. |
This algorithm does not support partitioning the FlexNVM. |
4. |
After a successful Program + Verify operation subsequent stand alone operations may fail if the programmed code executes Program Flash. |
5. |
To program the Flash configuration area [0x408 – 0x40C] the Secure command is enabled. |
| ||||||||
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Freescale Semiconductor |
|---|---|
| Packages | QFN(48) |
| Part Number | MKW36A512VHT4 |
| Vcc(program) | 3.3 |
| 8-bit Bytes | |
| Package |