Freescale Semiconductor MPC555LFMZP BGA(272) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM272BGC | FASM272BGC |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM272BGC, FASM272BGC | FSM272BGC, FASM272BGC |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM272BGC, FASM272BGC | FSM272BGC, FASM272BGC |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Erase operation will erase both Main flash and Shadow flash.This algorithm supports both Main flash and Shadow flash.The following describes buffer setup:addresses [0x0-0x3FFFF] Main flash Module A addresses[0x40000-0x6FFFF] Main flash module B.addresses [0x70000-0x700FF] Shadow flash Module A addresses[0x70100-0x701FF] Shadow flash module B.The blank state of each byte is 0xFF.Unused Shadow bytes must be filled with 0xFF’s.For correct buffer loading please set the following options.Under Device/Options please select MSB=0LSB=1′(Big-Endian) for Motorola system.Under Buffer/Options please set ‘Automatic lowest address to load’ to ‘DISABLE’.Buffer/Options ‘Default buffer value’ should be set to 0xFF. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Freescale Semiconductor |
|---|---|
| Packages | BGA(272) |
| Part Number | MPC555LFMZP |
| Vcc(program) | 3.3 |
| Package |