Freescale Semiconductor MPC565 BGA(388) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: Microcontroller with FLASH EEPROM.This algorithm supports both Main Flash and Shadow Flash.Erase operation will erase both Main Flash and Shadow Flash.The following describes buffer setup:Addresses [0x000000-0x07FFFF] Main Flash Module A;Addresses [0x080000-0x0FFFFF] Main Flash module B;Addresses [0x100000-0x1001FF] Shadow Flash Module A;Addresses [0x100200-0x1003FF] Shadow Flash module B.The blank state of each byte is 0xFF.Unused Shadow bytes must be filled with 0xFF’s.For correct buffer loading please set the following options.Under Device/Options please select MSB=0LSB=1′(Big-Endian) for Motorola system.Under Buffer/Options please set ‘Automatic lowest address to load’ to ‘DISABLE’.Buffer/Options ‘Default buffer value’ should be set to 0xFF.Starting revision 1.7 the socket module ASM388BGB was updated with 3M socket. The motor step is adjusted for the new socket. ‘