FTDI FT245RQ LAP(32) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FASMR32QFNR | FX4ASMR32QFNR, FASMR32QFNR, LX4ASMR32QFNR (repl.) | LX4ASMR32QFNR |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSMR32QFNR, FASMR32QFNR | FX4SMR32QFNR, FSMR32QFNR, FX4ASMR32QFNR, FASMR32QFNR, LX4ASMR32QFNR (repl.) | LX4ASMR32QFNR |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSMR32QFNR, FASMR32QFNR | FX4SMR32QFNR, FSMR32QFNR, FX4ASMR32QFNR, FASMR32QFNR, LX4ASMR32QFNR (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | USB UART IC |
| Device Size: | 1024-bit EEPROM |
| Algorithm Programming Method: | On-board Vinculum VNC1L |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| EEPROM | R/W/E | Yes | 00 – 7F | 00 – 7F |
* R:Read only W: One time programmable (OTP) R/W: Readable and one time programmable (OTP) R/W/E: Readable and rewritable if not locked W/E: Rewritable and erasable but not readable. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation. Special Device Considerations: Data pattern file must be in .bin or .hex format and contain only the raw data to be loaded to EEPROM. The last two bytes should contain the checksum of the data file. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | FTDI |
|---|---|
| Packages | LAP(32) |
| Part Number | FT245RQ |
| Set programming | Yes |
| Vcc(program) | 3.3 |
| Package |