Hynix Semiconductor H26M21001FPR (Custom01) BGA(169) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: This is a custom algorithm.
This algorithm can program data into Boot Area Partitions. Boot Area Partition 1 is mapped to Data Pattern: 000000000h-0000FFFFFh and Boot Area Partition 2 is mapped to Data Pattern: 000100000h-0001FFFFFh. General Purpose Partitions 1-4 if any are mapped directly after above mentioned boot partitions. This is followed by User Data Area. Sizes and attributes of General Purpose Partitions 1-4 can be set under Device->Settings. The size of each partition is defined to be multiple of ‘Write protect group size’. ‘Write protect group size’ of this device is 4MByte. The Enhanced attribute of User Data Area will be left at the default value ‘0x00’ (not Enhanced). Default device range is set to (00200000h – 070DFFFFF). 2GB MMC Card. The device contains 3842048 sectors. The Sector Count in the Extended CSD Register of the device might be less than the supported number of sectors. Ranges selectable under Device->Range must be aligned to 4096 device sectors. Each physical sector on the device has 512 bytes. Erased memory content for the device is 00h. Simple serialization is not supported for this device and should not be used. If certain partitions are included in erase operation all the selected partition(s) will be erased ‘