Intel RC48F3300J0Z00S BGA(64) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: This device contains two 128Mbit flash die. This device contains two 128 bit Protection Register one for each flash die. For flash die 1 the first 64 bits are mapped from 2000000h to 2000007h in the buffer. These bits are pre-programmed by the manufacturer and cannot be modified. The second 64 bits of the Protection Register are mapped from 2000008h to 200000Fh in the buffer and are one-time-user-programmable. For flash die 2the first 64 bits are mapped from 2000010h to 2000017h in the buffer. The second 64 bits of the Protection Register are mapped from 2000018h to 200001Fh in the buffer.When erasing Protection Register and OBLAthe programmer will blank-check these bits and will fail erase if theyare not blank. Locking the user-programmable segment of theProtection Register is a one time only operation. The Erasable Block Lock-bit Array(EBLA)Block Locking Configuration Register(BLCR) and OTP Block Lock-bit Array(OBLA) can be set in Device Configure.To use the OBLA for permanent block locking bit 7 of BLCR must be set to 0otherwise OBLA will be skipped during program and may fail verify.If certain bits of BLCR are programmed to 0 the Erasable Block Lock-Bit Array(EBLA)and/or OBLA may not be programmed any more. Please referto device specifications for the definition of BLCR bits. This algorithm will reject a part if bit 0 bit 2 bit 6 or bit 7 of BLCR is not blank. It’s suggested that the BLCR value is knownto the user before programming.