Lattice LCMXO3D-9400HC-6BG400I Custom01 csBGA(400) Device

Adapters for Automated Programmers

8th Gen

FVE2ASMR400BGA, FVE2ASMR400BGA

Adapters for Manual Programmers

8th Gen

FVE2ASMR400BGA, FVE2ASMR400BGA

Adapters for Engineering Programmers

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT: THIS IS A CUSTOM ALGORITHM

Device Type:

PLD

Memory Organization:

*Memory Type*	**Attributes^()***	*Included in default Range (Y/N)*	*DUT Physical Byte Address(hex)(if this area is selected/Activated)*	*BPWin Buffer Word Address(hex)*
Main Flash	R/W/E	Yes	[0-2063872] fuses	0x00000 – 0x3EFBF
USERCODE	R/W/E	Yes	0x3EFC0 – 0x3EFC3	0x3EFC0 – 0x3EFC3
Features Row and features bit (via .FEA file)	R/W/E	No	0x3EFC4 – 0x3F7FF	0x3EFC4 – 0x3F7FF
ECSDA Public Key (via .PEM file)	R/W/E	No	0x3F800 – 0x3FFFF	0x3F800 – 0x3FFFF

Default Algorithm Range	—	—	0x00000 – 0x3EFC3	0x00000 – 0x3EFC3

* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection.

Special Device Considerations:

Flash Image option is available under Device Config. Default is image CFG0. To program both CFG0 and CFG1 select ‘Both’.
When reading the Main Fuses or USERCODE only one configuration can be read at a time. If ‘Both’ is selected it will default to reading CFG0. The Feature Row/Bits is supported in ranges [0x3EFC4 – 0x3F7FF].
The MachXO3D .FEA File must loaded to ‘Data Patterns address’: 0x3EFC4 with Binary type.
The ECSDA Public Key is supported in ranges [0x3F800 – 0x3FFFF].
A .PEM file with only the ECSDA Public Key must loaded to ‘Data Patterns address’: 0x3F800 with Binary type.
This algorithm cannot read the Feature Row/Bits or ECSDA Public Key through the read operation.
This algorithm can verify the Feature Row/Bits or ECSDA Public Key through the verify operation.
Erase comand will erase the Main Flash USERCODE Features Row/Bits and ECSDA Public Key.
The following optional features are currently not supported:
1. Program password key.
2. Read/Verify device with password.
3. Program device with password.
4. Serialization.

‘



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

8-bit Bytes	262144
Manufacturer	Lattice
Packages	csBGA(400)
Part Number	LCMXO3D-9400HC-6BG400I Custom01
Set programming	Yes
Vcc(program)	3.3
Package