Macronix MX30LF4G28AC-TI TSOP(48) Device
Adapters for Automated Programmers
| 8th Gen | 9th Gen | Flashstream |
| FVE4ASMR48TML, FVE4ASMR48TML | FVE4ASMR48TML | FVE4ASMR48TML, FVE4ASMR48TML |
Adapters for Manual Programmers
| 8th Gen | 9th Gen | Flashstream |
| FVE4ASMR48TML, FVE4ASMR48TML | FVE4ASMR48TML | FVE4ASMR48TML, FVE4ASMR48TML |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: [This is a custom algorithm]
| Device Type: | NAND Flash Memory |
| Device Size: | 4Gbit |
| Algorithm Programming Method: | Parallel |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Main memorey | R/W/E | Yes | 000_0000-21BFFFFF | 000_0000-21BFFFFF |
| Default Algorithm Range | R/W/E | — | 000_0000-21BFFFFF | 000_0000-21BFFFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:
| Option | Description | Default | Supported (Y/N)? |
| Enable ECC | If set to Enable the internal ECC will be enabled. | Enabled | Yes |
| 1. | Serialization Supported: | Yes |
| 2. | Total number of blocks: | 4016 |
| 3. | Pages per block: | 64 |
| 4. | Page size: | 2160 byte |
| 5. | Spare area size: | 112 byte |
| 6. | Bad block markers location : | Byte 2048th of the 1 page or 2 page of a block. |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 566231040 |
|---|---|
| Manufacturer | Macronix |
| Packages | TSOP(48) |
| Part Number | MX30LF4G28AC-TI |
| Vcc(program) | 3.3 |
| Package |