Microchip Technology dsPIC30F4012T-20I/SO SOIC(28) Device
Adapters for Automated Programmers
| 9th Gen |
| FVE4ASMR28SA |
Adapters for Manual Programmers
| 9th Gen |
| FVE4ASMR28SA |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with User Flash Code Memory (16Kx24-bit) and Data EEPROM (1Kx16-bit).The Code Memory is a 24 bit memory addressed from [0h-FFFFh] in the Buffer.The Data EEPROM is a 16-bit memory addressed from [FFF800h-FFFFFFh] in the Buffer.The Data EEPROM is a 16-bit value on a 32-bit boundary. The Code Memory is a 24-bit valueon a 32-bit boundary. This algorithm assumes Little Endian format for programming data.Please set MSB=1LSB=0′ for this device.The device contain 32 instructions of Unit ID.These are located at address [1000B80-1000BFF] in the buffer.The Unit ID area is a 24-bit value on a 32-bit boundary.The Configuration bytes are located at Buffer addresses [1F00000h-1F00008h].Configuration bytes are also a 16-bit value on a 32-bit boundary.The Configuration word may be set from Device Configure or from the abovementioned addresses in the Buffer. All unimplemented bit locationsmust be set to zeros. Please use help notes in the Device Configure to viewmore information about bit identities and reserved bit locations or see Microchip specifications.Please use the Secure command to program the security options to the device.The ‘Sum’ command generates the checksum calculation as specified by Microchip. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Microchip Technology |
|---|---|
| Packages | SOIC(28) |
| Part Number | dsPIC30F4012T-20I/SO |
| Vcc(program) | 5 |
| Package |