Microchip Technology dsPIC33FJ256GP710T-I/PT QFP(100) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 8th Gen | 9th Gen |
| FASM100QFPD | FX4ASM100QFPD, FASM100QFPD | FVE4ASMR100QFPD, FVE4ASMR100QFPD | FVE4ASMR100QFPD |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 8th Gen | 9th Gen |
| FSM100QFPD, FASM100QFPD | FX4SM100QFPD, FSM100QFPD, FX4ASM100QFPD, FASM100QFPD, LX4ASM100QFPD (repl.) | FVE4ASMR100QFPD, FVE4ASMR100QFPD | FVE4ASMR100QFPD |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM100QFPD, FASM100QFPD | FX4SM100QFPD, FSM100QFPD, FX4ASM100QFPD, FASM100QFPD, LX4ASM100QFPD (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | Microcontroller |
| Device Size: | 256 Kbyte |
| Algorithm Programming Method: | ICSP |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| User Flash Code Memory | [R/W/E] | [Yes] | [00000-2ABFF] | [0-557FF] |
| [Configuration bytes] | [R/W/E] | [Yes] | [F80000-F8000F] | [1F00000h-1F0001Fh] |
| [User Unit ID bytes] | [R/W/E] | [Yes] | [F80010-F80017] | [1F00020h-1F0002Fh] |
| Default Algorithm Range | — | — | [00000-2ABFF] | [0-557FF] |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:
| 1. | Serialization Supported: | Yes |
| 2. | [Special file format required]: | No |
| 3. | ERASE will erase the entire memory including executive memory.The Configuration bytes and User Unit ID bytes may be set from Device Configure or from the above mentioned addresses in the Data Pattern | |
| 4. | All unimplemented bit locations must be set to zeros.Secured and Unsecured batches should not be mixed during standalone Verify or Secure. | |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Microchip Technology |
|---|---|
| Packages | QFP(100) |
| Part Number | dsPIC33FJ256GP710T-I/PT |
| Vcc(program) | 3.3 |
| Package |