Adapters for Automated Programmers
8th Gen |
FVE4ASMR28QFNZA, FVE4ASMR28QFNZA |
Adapters for Manual Programmers
8th Gen |
FVE4ASMR28QFNZA, FVE4ASMR28QFNZA |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
Device Type: | Microcontroller |
Device Size: | 4 kWords |
Algorithm Programming Method: | In-Circuit Serial Programming (ICSP) |
Memory Organization:
Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
Program Memory | R/W/E | Yes | 0000_0000h – 0000_1FFFh | 0000_0000h – 0000_1FFFh |
Default Algorithm Range | — | — | 0000_0000h – 0000_1FFFh | 0000_0000h – 0000_1FFFh |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:
1. | Serialization Supported: | Yes |
2. | Code Protection Erasable: | Yes |
3. | Erasing the device will erase Program Memory along with Configuraiton and ID bits but not Calibration Words. | |
4. | The ID locations are addressed in the Data Pattern at [4000h-4007h]. It is recommended by manufacturer that the user use only the seven Least Significant Bits of each ID locations and the remaining bits are masked to 1s during programming. | |
5. | Configuration words are located at Data Pattern addresses [400Eh(LSB)-400Fh(MSB)]. IDs and Configuration may be set under Device > Configureor from the above mentioned addresses in Data Pattern. |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
Manufacturer | Microchip Technology |
---|---|
Packages | LAP(28) |
Part Number | MCP19119T-E/MQ |
Vcc(program) | 5.2 |
Package |