Microchip Technology PIC10F202T-I/PG DIP(8) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM48D300 | FASM48D300 |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM48D, FSM48DH, FSM48DC, FASM48D300, FSM48DB (obs.) | FSM48D, FSM48DH, FSM48DC, FASM48D300, FSM48DB (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM48D, FSM48DH, FSM48DC, FASM48D300, FSM48DB (obs.) | FSM48D, FSM48DH, FSM48DC, FASM48D300, FSM48DB (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: The ID locations are addressed in the Buffer at [400h-407h].It is recommended by Microchip that theuser use only the four Least Significant Bits of each ID location.The Configuration word is located at Buffer addresses [1FFEh-1FFFh].Both ID and Configuration word can be set from Device Configure orfrom the above mentioned addresses in your data file.Code protection can only be set by enabling the Secure Option.The Oscillator Calibration Bits are stored at the Reset Vector.To program these bits for custom trimming of the INTOSC you mustENABLE Erase before programming’ and also in Device ConfigureENABLE ‘Customer Trimming INTOSC’ then set your desired value in’RESET VECTOR VALUE’. Otherwise these bits will be restoredto their original value.Secured and Unsecured batches should not be mixed during standalone Verify or Secure. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Microchip Technology |
|---|---|
| Packages | DIP(8) |
| Part Number | PIC10F202T-I/PG |
| Vcc(program) | 5 |
| Package |