Microchip Technology PIC12C508A-04/P DIP(8) Device

Adapters for Manual Programmers

9th Gen

LX4SM40DIPLT

Adapters for Engineering Programmers

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT: Insert the device so that device pin 1 is inserted to socket pin 5.

Device Type:	Microcontroller
Device Size:	512 Program Memory Flash Words

Memory Organization:

Memory Type	*Attributes^()**	Included in default Range (Y/N)	DUT Physical Byte Address(hex)(if this area is selected/Activated)	BPWin Buffer Byte Address(hex)
Main Program Flash Memory	R/W	Yes	0 – 1FFh	0 – 3FFh
User IDs	R/W	No	200h – 203h	400h – 407h
Configuration Word	R/W	No	FFFh	1FFEh-1FFFh

* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:

It is recommended by Microchip that the user uses only the four Least Significant Bits of each ID location. OTP devices may have an oscillator calibration value programmed by themanufacturer at device address 1FFh (Buffer addresses 3FEh & 3FFh).This algorithm will not program that address if it is not blank.Both the IDs and Configuration Word may be set using Device Configureor from the above mentioned addresses in the data file.Secure must be enabled to Code Protect the device.

‘



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

Manufacturer	Microchip Technology
Packages	DIP(8)
Part Number	PIC12C508A-04/P
Set programming	Yes
Vcc(program)	5
Package