Microchip Technology PIC16C926/L PLCC(68) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM68PE | FASM68PE |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM68PE, FSM68P, FSM68PA, FSM84UP, FASM68PE, FSM68PW (obs.), FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) | FSM68PE, FSM68P, FSM68PA, FSM84UP, FASM68PE, FSM68PW (obs.), FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM68PE, FSM68P, FSM68PA, FSM84UP, FASM68PE, FSM68PW (obs.), FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) | FSM68PE, FSM68P, FSM68PA, FSM84UP, FASM68PE, FSM68PW (obs.), FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: In the buffer the IDs are located in [4000h-4007h].The Configuration word is located at buffer address 400Eh. Both the ID andConfiguration word may be set from the Configure Options or from the abovementioned addresses in your data file. Reserved and Code Protect bitsare treated as don’t-care in the buffer. If Code Protection isdesired use Device Options Secure After Programming’ to program. Reservedbits are set in the programming algorithm and cannot be changed. The device’soperating voltage range is 4.0V-5.5V (LP XT and RC osc configuration) and4.5V-5.5V (HS osc configuration).Socket module information has been updated in revision 1.14.The following were removed as valid modules: [ASM68PC ASM68PASM64PQTSM64PQTASM64PQTMSM64PQTMASM64PQTXSM64PQTX] ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Microchip Technology |
|---|---|
| Packages | PLCC(68) |
| Part Number | PIC16C926/L |
| Vcc(program) | 5 |
| Package |