Microchip Technology PIC16F18313T-E/SN SOIC(8) Device
Adapters for Automated Programmers
| 8th Gen | 9th Gen |
| FVE4ASM08SJF, FVE4ASM08SJF | FVE4ASM08SJF |
Adapters for Manual Programmers
| 8th Gen | 9th Gen |
| FVE4ASM08SJF, FVE4ASM08SJF | FVE4ASM08SJF |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | Microcontroller |
| Device Size: | 32 KByte Program Flash Memory with 256 Byte EEPROM |
| Algorithm Programming Method: | In-Circuit Serial Programming (ICSP) interface |
| Serialization Supported: | Yes |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Program Flash Memory | R/W/E | Yes | 00000h-00FFFh | 00000h-00FFFh |
| EEPROM | R/W/E | Yes | 1E000h-1E1FFh | 1E000h-1E1FFh |
| Default Algorithm Range | — | — | 00000h-1E1FFh | 00000h-1E1FFh |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under ‘Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:
| 1. | Data pattern requires a 14-bit format for Program Flash memory and 8-bit format for EEPROM | |
| 2. | Erasing the device will erase Program Memory and Data Memory along with the Configuration and ID bitsbut not Calibration words! The Calibration words are skipped during all device operations. | |
| 3. | The ID locations are addressed in the Data Pattern at [10000h-10007h].It is recommended by manufacturer that the user use only the seven Least Significant Bits of eachID locations and the remaining bits are masked to 1s during programming. | |
| 4. | Configuration words are located at Data Pattern addresses [1000Eh(LSB)-1000Fh(MSB)][10010h(LSB)-10011(MSB)] [10012h(LSB)-10013h(MSB)] and[10014h(LSB)-10015(MSB)].IDs and Configuration may be set under Device > Configure or from the above mentioned addresses in Data Pattern. | |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Microchip Technology |
|---|---|
| Packages | SOIC(8) |
| Part Number | PIC16F18313T-E/SN |
| Vcc(program) | 5 |
| Package |