Microchip Technology PIC16F914T-I/P DIP(40) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM48D600 | FASM48D600 |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D600, FSM48DB (obs.) | FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D600, FSM48DB (obs.), FSM48D, FSM48DH, FSM48DF, FSM48DC, FASM48D600, FSM48DB (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D600, FSM48DB (obs.) | FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D600, FSM48DB (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: The ID locations are addressed in the Data Pattern at [4000h-4007h].It is recommended by Microchip that theuser use only the seven Least Significant Bits of each ID location.The Configuration word is located at Data Pattern address 400Eh. Both the ID andConfiguration word may be set from the Device Configure menu or from the abovementioned addresses in your data file.User Program memory is addressed in the Data Pattern at [0000h-1FFFh].EEPROM (Data Memory) is addressed in the Data Pattern at [4200h-43FFh].Chip erase will erase all the memory and configure word.The Device Sum command is to generate the checksum calculation asspecified by Microchip.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Microchip Technology |
|---|---|
| Packages | DIP(40) |
| Part Number | PIC16F914T-I/P |
| Vcc(program) | 5 |
| Package |