Microchip Technology PIC16LC923/L PLCC(68) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM68PE | FASM68PE |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM68PE, FSM68P, FSM68PA, FSM84UP, FASM68PE, FSM68PW (obs.), FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) | FSM68PE, FSM68P, FSM68PA, FSM84UP, FASM68PE, FSM68PW (obs.), FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM68PE, FSM68P, FSM68PA, FSM84UP, FASM68PE, FSM68PW (obs.), FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) | FSM68PE, FSM68P, FSM68PA, FSM84UP, FASM68PE, FSM68PW (obs.), FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: The ID locations are addressed in the buffer at 0x4000 – 0x4007.The Configuration word is located at buffer address 0x400E. Both the ID andConfiguration word may be set from the CONFIGURE menu or from the abovementioned addresses in your data file. Any reserved or Code Protect bit locationsare treated as don’t-cares in the buffer. If Code Protection isdesired use DEVICE/OPTIONS/’Secure After Programming’ to enable. Reservedbits are set in the programming algorithm and cannot be changed.Socket module information has been updated in revision 1.15.The following were removed as valid modules: [ASM68PC ASM68PASM64PQTSM64PQTASM64PQTMSM64PQTMASM64PQTXSM64PQTX]
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Microchip Technology |
|---|---|
| Packages | PLCC(68) |
| Part Number | PIC16LC923/L |
| Vcc(program) | 5 |
| Package |