Adapters for Automated Programmers
6th Gen | 7th Gen | 9th Gen |
FASMR64QPT, FASM64QAJ, FASM64PQTM, FASM64TQA, FASM64PQTF, FASM64PQTX, FASM64PQT, FASM64TQN, FASM64PQTA, LASMR64QPT (repl.) | FASMR64QPT, FASM64QAJ, FASM64PQTM, FASM64TQA, FASM64PQTF, FASM64PQTX, FASM64PQT, FASM64TQN, FASM64PQTA, LASMR64QPT (repl.) | LASMR64QPT |
Adapters for Manual Programmers
6th Gen | 7th Gen | 9th Gen |
FSM64PQTA, FASMR64QPT, FSM64QAJ, FSM64PQTM, FSM64TQA, FSM64PQTF, FSM64PQTX, FSM64PQT, FSM64TQN, FASM64QAJ, FASM64PQTM, FASM64TQA, FASM64PQTF, FASM64PQTX, FASM64PQT, FASM64TQN, FASM64PQTA, LASMR64QPT (repl.) | FSM64PQTA, FASMR64QPT, FSM64QAJ, FSM64PQTM, FSM64TQA, FSM64PQTF, FSM64PQTX, FSM64PQT, FSM64TQN, FASM64QAJ, FASM64PQTM, FASM64TQA, FASM64PQTF, FASM64PQTX, FASM64PQT, FASM64TQN, FASM64PQTA, LASMR64QPT (repl.), FSM64PQTA, FASMR64QPT, FSM64QAJ, FSM64PQTM, FSM64TQA, FSM64PQTF, FSM64PQT, FSM64PQTX, FSM64TQN, FASM64QAJ, FASM64PQTM, FASM64TQA, FASM64PQTF, FASM64PQT, FASM64PQTX, FASM64TQN, FASM64PQTA, LASMR64QPT (repl.) | LASMR64QPT |
Adapters for Engineering Programmers
6th Gen | 7th Gen |
FSM64PQTA, FASMR64QPT, FSM64QAJ, FSM64PQTM, FSM64TQA, FSM64PQTF, FSM64PQTX, FSM64PQT, FSM64TQN, FASM64QAJ, FASM64PQTM, FASM64TQA, FASM64PQTF, FASM64PQTX, FASM64PQT, FASM64TQN, FASM64PQTA, LASMR64QPT (repl.) | FSM64PQTA, FASMR64QPT, FSM64QAJ, FSM64PQTM, FSM64TQA, FSM64PQTF, FSM64PQTX, FSM64PQT, FSM64TQN, FASM64QAJ, FASM64PQTM, FASM64TQA, FASM64PQTF, FASM64PQTX, FASM64PQT, FASM64TQN, FASM64PQTA, LASMR64QPT (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with User Flash Code Memory (32Kx24-bit) The Code Memory is a 24 bit memory addressed from [0h-1FFFFh] in the Data Pattern. The two configuration words(2×24-bit) are addressed in the Data Pattern at [1FFF8h-1FFFFh]. The Code Memory(including configuration words) is a 24-bit value on a 32-bit boundary. This algorithm assumes Little Endian format for programming data. Please set Little Endian’ under Device > Byte Order. ERASE will erase the entire memory including executive memory. The Configuration words may be set from Device > Configure or from the above mentioned addresses in the Buffer. Please use help notes in the Device > Configure to view more information about bit identities and reserved bit locations or see Microchip specifications. The ‘Sum’ command generates the checksum calculation as specified by Microchip. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
Manufacturer | Microchip Technology |
---|---|
Packages | QFP(64) |
Part Number | PIC24FJ96GA006/PT |
Vcc(program) | 3.3 |
Package |