Micron MT25QL512ABB8ESF-0SIT SOP Device
Adapters for Automated Programmers
| 8th Gen | 9th Gen | Flashstream |
| FVE4ASM16SD, FVE4ASMR16SD | FVE4ASM16SD, FVE4ASMR16SD | FVE4ASM16SD, FVE4ASMR16SD |
Adapters for Manual Programmers
| 8th Gen | 9th Gen | Flashstream |
| FVE4ASM16SD, FVE4ASMR16SD | FVE4ASM16SD, FVE4ASMR16SD | FVE4ASM16SD, FVE4ASMR16SD |
Adapters for Engineering Programmers
Last Updated: 03/03/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | 512M-bit Serial SPI Flash |
| Device Size: | 512 Mbit |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) |
DUT Physical Byte Address(hex) (if this area is selected/Activated) |
BPWin Buffer Byte Address(hex) |
| Main Flash Area | R/W/E | Yes | 0000_0000-03FF_FFFF | 0000_0000-03FF_FFFF |
| 64-Byte OTP | R/W | No | 0400_0000-0400_003F | 0040_0000 – 0040_30FF |
| Default Algorithm Range | — | — | 0000_0000-03FF_FFF | 0000_0000-03FF_FFF |
* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under ‘Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection.
Special Device Considerations:
When OTP Data Protection Bit is set to SECURE further programming of the OTP sector is prohibited. The default Device Range is set to [0000000h-3FFFFFFh]. Please select ‘Entire File’ under Device Range if OTP area needs to be included. The Status Register and NVCR can be set under Device > Configure. |
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 67108928 |
|---|---|
| Manufacturer | Micron |
| Packages | SOP 16(16) |
| Part Number | MT25QL512ABB8ESF-0SIT |
| Set programming | Yes |
| Vcc(program) | 3.3 |
| Package |