Micron MT28EW256ABA1HPC0SIT BGA(64) Device
Adapters for Automated Programmers
| 7th Gen |
| FX4ASM64LBGA, FXASM64LBGA, FASM64LBGA, FXASM64FBGA (obs.), FASM64FBGA (obs.), FX4ASM64FBGB (obs.), FXASM64FBGB (obs.), FASM64FBGB (obs.) |
Adapters for Manual Programmers
| 7th Gen |
| FX4SM64LBGA, FXSM64LBGA, FSM64LBGA, FX4ASM64LBGA, FXASM64LBGA, FASM64LBGA, FXSM64FBGA (obs.), FSM64FBGA (obs.), FXASM64FBGA (obs.), FASM64FBGA (obs.), FX4SM64FBGB (obs.), FXSM64FBGB (obs.), FSM64FBGB (obs.), FX4ASM64FBGB (obs.), FXASM64FBGB (obs.), FASM64FBGB (obs.), WX4ASM64FBGB (obs.) (repl.), LX4ASM64LBGA (repl.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FXSM64LBGA, FSM64LBGA, FXASM64LBGA, FASM64LBGA, FXSM64FBGA (obs.), FSM64FBGA (obs.), FXASM64FBGA (obs.), FASM64FBGA (obs.), FXSM64FBGB (obs.), FSM64FBGB (obs.), FXASM64FBGB (obs.), FASM64FBGB (obs.) | FX4SM64LBGA, FXSM64LBGA, FSM64LBGA, FX4ASM64LBGA, FXASM64LBGA, FASM64LBGA, FXSM64FBGA (obs.), FSM64FBGA (obs.), FXASM64FBGA (obs.), FASM64FBGA (obs.), FX4SM64FBGB (obs.), FXSM64FBGB (obs.), FSM64FBGB (obs.), FX4ASM64FBGB (obs.), FXASM64FBGB (obs.), FASM64FBGB (obs.), WX4ASM64FBGB (obs.) (repl.), LX4ASM64LBGA (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | Parallel NOR Flash Embedded Memory |
| Device Size: | 256M-bit |
| Algorithm Programming Method: | Parallel |
Memory Organization:
| Memory Type | Attributes* | Included in Default Range (Y/N) | DUT Physical Byte Address (hex)(if this area is selected/activated) | BPWin Buffer Byte Address (hex) |
| Main Flash Memory | R/W/E | Yes | 0000_0000h – 01FF_FFFFh | 0000_0000h – 01FF_FFFFh |
| Extended Memory Block | R/W | No | 0000_0000h – 0000_00FFh | 0200_0000h – 0200_00FFh |
| Default Algorithm Range | — | — | 0000_0000h – 01FF_FFFFh | 0000_0000h – 01FF_FFFFh |
* R:Read only W: One time programmable (OTP) R/W: Readable and one time programmable (OTP) R/W/E: Readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device->Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:
| Option | Description | Default |
| Nonvolatile Protection Bits | Prevents modification of the corresponding Flash Block | Unprotected (1b) |
| Nonvolatile Protection Mode Lock Bit | If set device will permanently operate in Nonvolatile Protection Mode. | Cleared (1b) |
| Extended Memory Block Lock Bit | If set Extended Memory Block cannot be programmed further. | Cleared (1b) |
| Extended Memory Block Factory Locked | Read-only. If factory locked Extended Memory Block cannot be programmed by the user. | Device dependent |
| The Extended Memory Block can be purchased programmed and locked from the factory.If this is the case this block cannot be modified and should be excluded from Program and Erase operations.This block could have a unique value from the factory and thus it may fail Verify and Compare operations.A Read operation will return the factory lock status under Device->Settings->Extended Memory Block Factory Locked.The Nonvolatile Protection Bit Lock Bit and Password Protection are not currently supported. |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Micron |
|---|---|
| Packages | BGA(64) |
| Part Number | MT28EW256ABA1HPC0SIT |
| Set programming | Yes |
| Vcc(program) | 3.3 |
| Package |