National Semiconductor SC14404 QFP(100) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM100TQE, FASM100TQCBW, FASM100TQB, FASM100TQD, FASM100TQC, FASM100TQBW (obs.) | FASM100TQE, FASM100TQCBW, FASM100TQB, FASM100TQD, FASM100TQC, FASM100TQBW (obs.) |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM100TQE, FSM100TQCBW, FSM100TQB, FSM100TQD, FSM100TQC, FASM100TQE, FASM100TQCBW, FASM100TQB, FASM100TQD, FASM100TQC, FASM100TQBW (obs.) | FSM100TQE, FSM100TQCBW, FSM100TQB, FSM100TQD, FSM100TQC, FASM100TQE, FASM100TQCBW, FASM100TQB, FASM100TQD, FASM100TQC, FASM100TQBW (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM100TQE, FSM100TQCBW, FSM100TQB, FSM100TQD, FSM100TQC, FASM100TQE, FASM100TQCBW, FASM100TQB, FASM100TQD, FASM100TQC, FASM100TQBW (obs.) | FSM100TQE, FSM100TQCBW, FSM100TQB, FSM100TQD, FSM100TQC, FASM100TQE, FASM100TQCBW, FASM100TQB, FASM100TQD, FASM100TQC, FASM100TQBW (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with 320K byte program flash. Warning !!! Erase any block will erase the whole chip.In the buffer addresses [00000h-1FFFFh] are 128K bytes for flash block 1;addresses [20000h-3FFFFh] are 128K bytes for flash block 2;addresses [40000h-4FFFFh] are 64K bytes for flash block 3. To enable read protect from on-chip RAM please set value for address 4h to 15h of information block 1under Device/Configure this will not have any effect in this progamming mode;To enable write protection please set Device/Options/Secure after programming to WPROT.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 327680 |
|---|---|
| Manufacturer | National Semiconductor |
| Packages | QFP(100) |
| Part Number | SC14404 |
| Set programming | Yes |
| Vcc(program) | 3 |
| Package |