NEC uPD70F3235M1GC(A2)-8EA QFP(100) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM100QNE | FASM100QNE |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSM100QNE, FASM100QNE, WASM100QNE (repl.) | FSM100QNE, FASM100QNE, WASM100QNE (repl.) | WASM100QNE |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM100QNE, FASM100QNE, WASM100QNE (repl.) | FSM100QNE, FASM100QNE, WASM100QNE (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: This algo is based on parameter file 70F3235.prm version 1.10.3-Wire Serial I/O Mode(CSIB0).The Security Byte can be set through Device Configureand programmed with Secure command.In order to program this Byte please enable Secure.Set Bit 0 to 0 will disable Chip EraseSet Bit 1 to 0 will disable Block EraseSet Bit 2 to 0 will disable Program.Set Bit 3 to 0 will disable Read.Bits 4 to 7 are reserved and should be set to 1s.Bit 1 2 and 3 can be erased through Chip Erase but once bit 0 isprogrammed to 0 the whole chip is secured and no operation can be done on it.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 262144 |
|---|---|
| Manufacturer | NEC |
| Packages | QFP(100) |
| Part Number | uPD70F3235M1GC |
| Vcc(program) | 5 |
| Package |