+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page

Nordic Semiconductor nRF51822-QFAB-R QFN(48) Device

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Note


IMPORTANT:

Device Type: nRF51 Microcontroller w/ARM Cortex-M0 32 bit processor
Device Size: 128 KByte Code Memory with 256 Byte FICR & UICR
Algorithm Programming method: SWD protocol


Memory Organization:

Memory Type

Attributes(*)

Included in default Range (Y/N) DUT Physical Byte Address(hex)(if this area is selected/Activated) BPWin Buffer Byte Address(hex)
Code Memory R/W/E Yes 0000_0000 – 0001_FFFF 0000_0000 – 0001_FFFF
FICR Memory R Yes 1000_0000 – 1000_00FF 1000_0000 – 1000_00FF
UICR Memory R/W/E Yes 1000_1000 – 1000_10FF 1000_1000 – 1000_10FF
Default Algorithm Range 0000_0000 – 1000_10FF 0000_0000 – 1000_10FF

* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation depending on memory range selection.Special Device Considerations:

Option Description
UICR User Information Configuration Registers. This memory area includes read back protection configuration.The read back protection offset is 0x04. These values are mapped to the configuration options from the buffer.Offset range 0x014 – 0x07C are reserved for Nordic. Offset range 0x080 – 0x0FC are reserved for user.
FICR Factory Information Configuration Registers. This region is pre-programmed in factory and cannot be erased by the user. These registers contain chip specific information and configurations.

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

8-bit Bytes

268439808

Manufacturer

Nordic Semiconductor

Packages

QFN(48)

Part Number

nRF51822-QFAB-R

Set programming

Yes

Vcc(program)

3.3

Package