NXP Semiconductors LPC11C24FBD48/301 QFP(48) Device
Adapters for Automated Programmers
| 9th Gen |
| FVE4ASMR48LQFPC |
Adapters for Manual Programmers
| 9th Gen |
| FVE4ASMR48LQFPC |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | 32-bit ARM Cortex-M0 Microcontroller |
| Device Size: | 32 Kbyte Flash |
| Algorithm Programming Method: | SWD + Bootloader Handshake Protocol |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| [Flash Memory] | [R/W/E] | [Yes] | [00000 – 7FFF] | [00000 – 7FFF] |
| Default Algorithm Range | — | — | [00000 – 7FFF] | [00000 – 7FFF] |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:
Code read protection (CRP) is enabled by programming the Flash address location 2FCh (User flash sector 0). CRP works in conjunction with the following values (Little Endian Byte format): CRP1 is enabled if value 12345678h(305419896 Decimal) is programmed. Access to chip via the SWD pins is disabled. CRP2 is enabled if value 87654321h(2271560481 Decimal) is programmed. Access to chip via the SWD pins is disabled. The following ISP commands are also disabled: Read Memory Write to RAM Go Copy RAM to flash and Compare. ISP erase command only allows erasure of all user sectors. CRP3 is enabled if value 43218765h(1126270821 Decimal) is programmed. Access to chip via the SWD pins is disabled. ISP entry by pulling P2.10 LOW is disabled if a valid user code is present in flash sector 0. When this mode is invoked no future factory testing can be performed on the device.
| Serialization Supported: | Yes |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 32768 |
|---|---|
| Manufacturer | NXP Semiconductors |
| Packages | QFP(48) |
| Part Number | LPC11C24FBD48/301 |
| Vcc(program) | 3.3 |
| Package |