NXP Semiconductors LPC812M101JTB16 XSON(16) Device
Adapters for Automated Programmers
| 8th Gen | 9th Gen |
| FVE4ASMC16QFNF, FVE4ASMC16QFNF | FVE4ASMC16QFNF |
Adapters for Manual Programmers
| 8th Gen | 9th Gen |
| FVE4ASMC16QFNF, FVE4ASMC16QFNF | FVE4ASMC16QFNF |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | ARM-based 32-bit MCU |
| Device Size: | 16KB Flash |
| Algorithm Programming Method: | Custom Flash Loader |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Flash Memory | R/W/E | Yes | 0000 – 3FFF | 0000 – 3FFF |
| Default Algorithm Range | — | — | 0000 – 3FFF | 0000 – 3FFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection.
Special Device Considerations:
| 1. | The CRP is located at 0x2FC. Programming this location may result in disabled communication with the device. Stand alone operations will fail if this occurs.
| 2. |
Serialization is not supported on this device. |
| ||
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 16384 |
|---|---|
| Manufacturer | NXP Semiconductors |
| Packages | XSON(16) |
| Part Number | LPC812M101JTB16 |
| Set programming | Yes |
| Vcc(program) | 3.3 |
| Package |