NXP Semiconductors MC908AS60ACFNE PLCC(52) Device
Adapters for Automated Programmers
| 8th Gen |
| FVE4ASMR52PT, FVE4ASMR52PT |
Adapters for Manual Programmers
| 8th Gen |
| FVE4ASMR52PT, FVE4ASMR52PT |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | M68HC08 Family of 8-bit microcontrollers |
| Device Size: | 60 Kbytes Flash + 1Kbyte EEPROM |
| Algorithm Programming Method: | Monitor Mode serial protocol + Custom bootloader |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) | FLASH-2 | R/W/E | Yes | 0000 0450 – 0000 05FF | 0000 0450 – 0000 05FF | EEPROM-2 | R/W/E | Yes | 0000 0600 – 0000 07FF | 0000 0600 – 0000 07FF | EEPROM-1 | R/W/E | Yes | 0000 0800 – 0000 09FF | 0000 0800 – 0000 09FF | FLASH-2 | R/W/E | Yes | 0000 0E00 – 0000 7FFF | 0000 0E00 – 0000 7FFF | FLASH-1 | R/W/E | Yes | 0000 8000 – 0000 FDFF | 0000 8000 – 0000 FDFF |
| Default Algorithm Range | — | — | 0000 0000 – 0000 FFFF | 0000 0000 – 0000 FFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation. Special Device Considerations: The following describes the Registers and security bytes: Registers located at the following addresses. EE1DIVHNVR:0xFE10 EE1DIVLNVR:0xFE11 EE1NVR:0xFE1C EE2DIVHNVR:0xFF70 EE2DIVLNVR:0xFF71 EE2NVR:0xFF7C FL1BPR:0xFF80 and FL2BPR:0xFF81. Vectors at the following locations 0xFFD2-0xFFD3 and 0xFFDA-0xFFFF. Security bytes at 0xFFF6-0xFFFD. To read a programmed device the buffer must be filled with correct data from addresses 0xFFF6-0xFFFD. Make sure to fill buffer with right data at locations 0xFE10 and 0xFF70(EEDIVHNVR registers) and 0xFE1C and 0xFF7C(EENVR registers). These registers have one time programmable bits that protect portions of EEPROM permanently. The Erase command under Device menu only erases the Flashes. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 65536 |
|---|---|
| Manufacturer | NXP Semiconductors |
| Packages | PLCC(52) |
| Part Number | MC908AS60ACFNE |
| Vcc(program) | 4.8 |
| Package |