NXP Semiconductors MM908E625ACPEK SOIC(54) Device
Adapters for Automated Programmers
| 9th Gen |
| WASM54S |
Adapters for Manual Programmers
| 9th Gen |
| WASM54S |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | Microcontroller. |
| Device Size: | 16 KB. |
| Algorithm Programming method: | Monitor + Boot Code. |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Word Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Flash Area | R/W/E | Yes | 0000_C000 – 0000_FDFF | 0000_C000 – 0000_FDFF |
| FLASH Block Protect Register (FLBPR) | R/W/E | Yes | 0000_FF7E – 0000_FF7E | 0000_FF7E – 0000_FF7E | FLASH Vectors | R/W/E | Yes | 0000_FFDC – 0000_FFFF | 0000_FFDC – 0000_FFFF |
| Default Algorithm Range | — | — | 0000_C000 – 0000_FFFF | 0000_C000 – 0000_FFFF |
* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:
The latest version of this device has an eight bytes security feature from $FFF6 to $FFFD. To read a programmed device with the security feature the buffer or Device/Configure must be filled with correct data from address $FFF6 to $FFFD. Incorrect data at these locations will prevent access to the dev
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 65536 |
|---|---|
| Manufacturer | NXP Semiconductors |
| Packages | SOIC(54) |
| Part Number | MM908E625ACPEK |
| Vcc(program) | 12 |
| Package |