Philips Semiconductors P87C54 QFP(44) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM44PQB | FASM44PQB |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSM44PQB, FASM44PQB, WX4ASM44PE (repl.) | FSM44PQB, FASM44PQB, WX4ASM44PE (repl.) | WX4ASM44PE |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM44PQB, FASM44PQB, WX4ASM44PE (repl.) | FSM44PQB, FASM44PQB, WX4ASM44PE (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with EPROM.Socket module information has been updated in revision 1.23.The following were removed as valid modules: SM44QZ SM44QCS ASM44PQ SM44PQ ASM44PQC and SM44PQC.Default buffer value must be set to 255(FFh). The EncryptBuf is used on read back. If the Encryption arrayhas been programmed EncryptBuf must contain the correct encryption key to read the device properly. If encryptionis not being used on this device all 64 bytes in the EncryptBuf should be set to 255(FFh).You must select the appropriate security mode under DEVICE/OPTIONS to operate the secure command.Three lock bits are available in this chip: LB1 LB2 and LB3. Mode2′ programs LB1 ‘Mode3’ programs LB1 and LB2 and ‘Mode4’ programs all lock bits.!!!Note: If both Encryption and Secure functions are required they must be done together by enabling both the ‘Encrypt after programming’ and ‘Secure after programming’ options under DEVICE/OTPIONS. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 16384 |
|---|---|
| Manufacturer | Philips Semiconductors |
| Packages | DIP(40) PLCC(44) QFP(44) |
| Part Number | P87C54 |
| Vcc(program) | 5 |
| Package |