Philips Semiconductors P89C51RD2 (DIP40) DIP(40) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM48D600 | FASM48D600 |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D600, FSM48DB (obs.) | FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D600, FSM48DB (obs.), FSM48D, FSM48DH, FSM48DF, FSM48DC, FASM48D600, FSM48DB (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D600, FSM48DB (obs.) | FSM48D, FSM48DH, FSM48DC, FSM48DF, FASM48D600, FSM48DB (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with flash.There are three security options under Secure Options.Please consult Philips specifications for information about Lock Bits.Erasing the device is the only way to reset the Lock Bits.Default value for Boot Vector byte is FCh.Default value for Status Byte is 00h.Use Device Configure menu to adjust these values.The Data Block is mapped to buffer locations 10001h-10FFFh.Please note that location 10000h in the buffer will not reflect state of special cells in device.Please program and verify the special cells through the Secure Options and Device Configure menus.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 69632 |
|---|---|
| Manufacturer | Philips Semiconductors |
| Packages | DIP(40) |
| Part Number | P89C51RD2 |
| Set programming | Yes |
| Vcc(program) | 5 |
| Package |