Renesas M30280FAWG-U5 BGA(85) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM85LGA | FASM85LGA |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSM85LGA, FASM85LGA, LASM85LGA (repl.) | FSM85LGA, FASM85LGA, LASM85LGA (repl.) | LASM85LGA |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM85LGA, FASM85LGA, LASM85LGA (repl.) | FSM85LGA, FASM85LGA, LASM85LGA (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: M16C/28 Microcomputer Flash Memory Version. This algorithm is written in parallel I/O mode. In the buffer 4K-byte Boot ROM is mapped to 00000h-00FFFh. 4K-byte Data ROM (block A & B) is mapped to 0F000h-0FFFFh 96K-byte User ROM is mapped to E8000h-FFFFFh. The User Boot and Data ROMs are selected in the Configure Options. Buffer locations 01000h-0EFFFh and 10000h-E7FFFh are not used and should be filled with FFh. Buffer locations FFE00h-FFFFFh are special. Buffer locations FFFFEh-FFFFFh is the security word. Config Options allow the individual ROM sections to be selected for device operations. Before executing any command at least 1 Operations Area must be selected. The Boot ROM area of the device has a standard serial I/O mode control program stored in it when shipped from the factory. Therefore if the device is going to be used in standard serial I/O mode do not rewrite the Boot ROM area.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Renesas |
|---|---|
| Packages | BGA(85) |
| Part Number | M30280FAWG-U5 |
| Vcc(program) | 5 |
| Package |