Renesas M30620FCMGP QFP(100) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM100TQL, FASM100TQGA, FASM100PQTI, FASM100TQG, FASM100TQGM | FASM100TQL, FASM100TQGA, FASM100PQTI, FASM100TQG, FASM100TQGM |
Adapters for Manual Programmers
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FASM100TQL, FSM100TQGA, FSM100TQL, FSM100PQTI, FSM100TQG, FSM100TQGM, FASM100TQGA, FASM100PQTI, FASM100TQG, FASM100TQGM | FASM100TQL, FSM100TQGA, FSM100TQL, FSM100PQTI, FSM100TQG, FSM100TQGM, FASM100TQGA, FASM100PQTI, FASM100TQG, FASM100TQGM |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: M16C/62M Microcomputer Flash Memory Version.In the buffer the address is in byte mode (8 bit). 8K-byte Boot block memory is mapped to 0000h-1FFFh.User area is divided into several blocks and they are mapped to E0000h-FFFFFh.Buffer locations 2000h-DFFFFh are not used and should be filled with FFh.Buffer locations FFE00h-FFFFFh are special.Buffer locations FFFFEh-FFFFFh is the security word. If secured standalone operations will fail.Device Configure Options allow the individual ROM sections to be selected for device operations. Before executingany command at least 1 Operations Area must be selected.All blocks can be locked by setting LOCK under Device Configure and the lock-bits can be cleared only by erase.The Boot ROM area of the device has a standard serial I/O modecontrol program stored in it when shipped from the factory.Therefore if the device is going to be used in standard serial I/O modedo not rewrite the Boot ROM area.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Renesas |
|---|---|
| Packages | QFP(100) |
| Part Number | M30620FCMGP |
| Set programming | Yes |
| Vcc(program) | 3.3 |
| Package |