Renesas R5F2L38CCNFP(Custom01) QFP(80) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FASMR80QPC | FX4ASMR80QPC, FASMR80QPC, LX4ASMR80QPC (repl.) | LX4ASMR80QPC |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FASMR80QPC | FX4ASMR80QPC, FASMR80QPC, LX4ASMR80QPC (repl.) | LX4ASMR80QPC |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FASMR80QPC | FX4ASMR80QPC, FASMR80QPC, LX4ASMR80QPC (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | R8C CPU core |
| Device Size: | 128 Kbytes Internal ROM + 4 Kbytes of Dataflash ROM |
| Algorithm Programming Method: | Two-wire UART Mode |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| DataFlash Area | R/W/E | Yes | 0000_3000 – 0000_3FFF | 0000_3000 – 0000_3FFF |
| Main Flash Memory | R/W/E | Yes | 0000_4000 – 0002_3FFF | 0000_4000 – 0002_3FFF |
| Default Algorithm Range | — | — | 0000_3000 – 0002_3FFF | 0000_3000 – 0002_3FFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation. Special Device Considerations: There are 7 ID codes located at FFDFh FFE3h FFEBh FFEFh FFF3h FFF7h and FFFBh. If the flash is not blank the data at these locations in the buffer must match the ID codes in the device to enable the Standard Serial I/O mode. If the ID codes do not match communication cannot be established. If the device was previously programmed with another set of ID codes a stand alone Erase operation must be executed with correct ID codes before attempting to reprogram the flash. When reading a programmed device disable clearing the buffer before reading or the ID codes will not match. For blank devices (factory programmed) Erase operation is redundant and should be disabled using Device Options. This algorithm does not support lock bit configuration ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 147456 |
|---|---|
| Manufacturer | Renesas |
| Packages | QFP(80) |
| Part Number | R5F2L38CCNFP |
| Set programming | Yes |
| Vcc(program) | 3.3 |
| Package |