Renesas R5F3640DNFB QFP(100) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 8th Gen |
| FASMR100TQGD | FASMR100TQGD | FVE4ASMR100LQFZB, FVE4ASMR100LQFZB |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 8th Gen |
| FSMR100TQGD, FASMR100TQGD, WASMR100TQGD (repl.) | FSMR100TQGD, FASMR100TQGD, WASMR100TQGD (repl.) | FVE4ASMR100LQFZB, FVE4ASMR100LQFZB |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSMR100TQGD, FASMR100TQGD, WASMR100TQGD (repl.) | FSMR100TQGD, FASMR100TQGD, WASMR100TQGD (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | M16C/64 Microcomputer Flash Memory |
| Device Size: | 8KB Data Flash+ 256KB Program ROM 1+ 16KB Program ROM 2 |
| Algorithm Programming Method: | Parallel I/O Mode |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Data Flash | R/W/E | Yes | 00_E000 – 00_FFFF | 00_0000 – 00_1FFF |
| Program ROM 2 | R/W/E | Yes | 01_0000 – 01_3FFF | 00_2000 – 00_5FFF |
| Program ROM 1 | R/W/E | Yes | 0C_0000 – 0F_FFFF | 0C_0000 – 0F_FFFF |
| Default Algorithm Range | — | — | — | 00_0000 – 0F_FFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:
| 1. | Data Pattern locations FFE00h-FFFFFh are special. | |
| 2. | Data Pattern locations FFFFEh-FFFFFh is the security word. If secured standalone operations will fail. | |
| 3. | Device Configure Options allow the individual ROM sections to be selected for device operations.Before executing any command at least 1 Operations Area must be selected. | |
| 4. | All blocks can be locked by setting LOCK under Device Configure and the lock-bits can be cleared only by erase. | |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Renesas |
|---|---|
| Packages | QFP(100) |
| Part Number | R5F3640DNFB |
| Set programming | Yes |
| Vcc(program) | 5 |
| Package |