Renesas R7F7010224AFP QFP(100) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FASMR100QFPT, LX4ASMR100QFPT (repl.) | FASMR100QFPT, LX4ASMR100QFPT (repl.) | LX4ASMR100QFPT |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FASMR100QFPT, LX4ASMR100QFPT (repl.) | FASMR100QFPT, LX4ASMR100QFPT (repl.) | LX4ASMR100QFPT |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FASMR100QFPT, LX4ASMR100QFPT (repl.) | FASMR100QFPT, LX4ASMR100QFPT (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: 3-Wire Serial I/O Mode. 384kB Code Flash. Device Address range 00000000h-0005FFFFh is mapped to Data Pattern addresses 00000h-5FFFFh. 32kB Data Flash. Device Address range FF200000h-FF207FFFh is mapped to Data Pattern addresses 60000h-67FFFh. Erase function for a Blank secured device is not supported. Security for this device cannot be verified. The Security Byte can be set under Device > Configure and programmed with Secure command. In order to program this Byte please enable Secure. Set Bit 5 to 0 will disable Erase Set Bit 6 to 0 will disable Program Set Bit 7 to 0 will disable Read. Bits 4 to 0 are reserved and should be set to 1s. Bits 6 and 7 can be erased through Chip Erase but once bit 5 is programmed to 0 the whole chip is secured.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 425984 |
|---|---|
| Manufacturer | Renesas |
| Packages | QFP(100) |
| Part Number | R7F7010224AFP |
| Set programming | Yes |
| Vcc(program) | 5 |
| Package |